369-HI-R-M-F-E-H-E Multi-wire 369 Series motor management relays

Product description
The 369-HI-R-M-F-E-H-E is part of the General Electric Multi-wire Series 369 motor management relays. This model 369, along with its upgrades and accessories, will soon be discontinued and is in its last purchase condition. Some upgrades, such as conformal coatings that act as protective layers against corrosion, high temperature, dust and moisture, can still be added after production lines are discontinued.

The multi-wire 369-Hi-R-M-0-0-0-E is designed to protect and control the motor and its supporting components. 369 achieves this through a variety of built-in features, including:

Metering: The 369 can monitor voltage, watt, frequency and energy equivalents and generate protection based on the generated value data.

Event logging: Immediately after a trip, 369 reports the cause of the trip, as well as the temperature and data values at the time of the trip, enabling users to analyze problems occurring in the system.

Pre-trip alarm: The 369 notifies the user before tripping due to ground failure, mechanical blockage, RTD overtemperature, etc.

Vehicle health reports: Relays can use learned information and a history of system trips to identify when and where maintenance may be needed.

Oscillographic method: Three waveform records are triggered when tripping, and sixteen data cycles are captured. During this process, the phase and ground current as well as the contact input state are captured.

The large amount of data generated by the 369-HI-R-M-0-0-0-E relay and the protection features employed help reduce troubleshooting time and extend system life, making it the best choice for medium-sized motors.

369-HI-R-M-F-E-H-E GE Multilin Inputs Specifications

CONTROL POWER
LO range	DC: 20 to 60 V DC AC: 20 to 48 V AC at 50/60 Hz
HI range	DC: 50 to 300 V DC AC: 60 to 265 V AC at 50/60 Hz
Power	nominal: 20 VA; maximum: 65 VA
Holdup	non-failsafe trip: 200 ms; failsafe trip: 100 ms
PHASE CURRENT INPUTS (CT)
CT input (rated)	1 A and 5 A secondary
CT primary	1 to 5000 A
Range: for 50/60 Hz nominal frequency: for variable frequency	0.05 to 20 × CT primary amps 0.1 to 20 × CT primary amps
Full Scale	20 × CT primary amps or 65535 A maximum
Frequency	.20 to 100 Hz
Conversion	True RMS, 1.04 ms/sample
DIGITAL / SWITCH INPUTS
Inputs	6 optically isolated
Input type	Dry Contact (< 800 Ω)
Function	Programmable

369-HI-R-M-F-E-H-E Motor Management Relay Front and Rear View

GE 369

369-HI-R-M-0-0-0-E

Additional Features of 369-HI-R-M-F-E-H-E

1. Modbus/TCP protocol Ethernet interface

2. Profibus-DP rear communication port

3. Profibus-DPV1 rear communication port

4. DeviceNet protocol interface D

5. User Definable Baud Rate (1200-19200)

6. Flash Memory for easy firmware updates

7. Front RS232 communication port

8. Rear RS485 communication port

9. Rear fiber optic port

10. RTD type is user-definable R or RTD

11. 4 User Definable Analog Outputs (0 to 1 mA, 0 to 20 mA, 4 to 20 mA)

12. Windows-based PC program for setting up and monitoring

GE Other Products

IC693CPU311	IC697CPU772	DS200UPSAG1AGD
IC697BEM711	IC69CMM321	IC693MDL752
IC670ALG620	IS200EXHSG4A	IC200ALG320
IC697CPX935	IS200EXAMG1A	DS200TCPSG1APE
DS200KLDCG1AAA	IC693MDL646	IC693ACC310
IC693BEM331	HE693ADC409	DS200DDTBG2ABB
IC697CPX935-FD	531X306LCCBFM1	IS200WETBJ1ABA
IC697CPM915	IC693ALG442	531X305NTBAPG1
DS200SDCCG5A	IC693CHS397	DS3810MMBB1A1A
IS200BPVCG1BR1	IC694ALG223	DS200DMCBG1AJE
IC693ALG391	IC687BEM731	IC693CPU363
IC693MDL330	IC695PSA040	IC694PWR330
IS200TBACIH1B	IC694MDL740	IC670ALG630
IC670MDL740	IS200TBAIH1C	DS200DTBBG1ABB
IC695CPU320	IC670ALG230	IC694MDL660
IC695CPU315	IS415UCVHH1AB IS415UCVHH1A	369-HI-R-M-0-0-H-E
IC200PNS002	IC670MDL241	IC697ALG320
IC693MDL930	IS200EPDMG1B	IC670PBI001
IS200EXHSG3AEB	IC670MDL730	IC693MDL740
IC200MDL740	DS200CDBAG1ACA DS200CDBAG1A	IC697RCM711
IC200ALG331	IC693CMM302	IC693CPU374-KZ
IC693CPU374	DS215TCQAG1BZZ01A	IC697CPM925
IC698RMX016	DS200FSAAG1A	IC695ALG600