ABB PFTL 101AE-0.5kN weighing sensor

ABB PFTL 101AE-0.5kN weighing sensor is a high-precision and highly stable industrial-grade tension sensor, specially designed for medium and heavy industrial load scenarios. It features excellent environmental adaptability and strong anti-interference capabilities. Here is a detailed introduction:
I. Core Parameters
Rated Load: 20.0kN (approximately 2040kgf), suitable for medium and heavy industrial load scenarios.
Accuracy: Non-linear error ±0.03%FS (full scale), repeatability error ≤±0.2%FS, meeting high-precision measurement requirements.
Response Time: 125μs, supports bidirectional horizontal/vertical force measurement, compatible with high-speed dynamic tension control.
Protection Level: IP67 (dust-proof, short-term water immersion protection), resistant to chemical corrosive media and 95% humidity.
Operating Temperature: -40℃ to +85℃, shock and vibration resistant (10Hz-200Hz/3Grms), suitable for extreme climates and vibrating environments.
Overload Capacity: Measurement direction overload 25kN (125%FS), lateral impact load 30kN, built-in temperature compensation algorithm ensures error <0.05%FS across the entire temperature range.
Electrical Design: 24V DC power supply, input impedance 10kΩ, low-pass filter cutoff frequency 14kHz, output AC signal up to 270V rms.

Application scenarios:
Metal processing: Monitor the tension of steel strips in cold rolling machines, annealing lines, and pickling lines. In conjunction with the AGC system of the rolling mill, control the thickness deviation within ±0.3 μm, reducing the breakage rate by 45% and increasing the annual production of precision foil by 20,000 tons; During the cutting of lithium battery copper foil, achieve precise control of tension ranging from 0.1 to 5N, increasing the qualification rate to 99.2%.
Paper and printing: Monitor the tension of paper sheets at the wet end of paper production, dealing with high humidity and chemical corrosion; The printing machine maintains constant paper tension, reducing registration deviation (from ±0.15mm to ±0.03mm); The packaging rewind machine controls the tension of the roll material, reducing the scrap rate.
Chemical and conventional industries: Resist corrosive media in weak acid production lines and metal sheet processing in saline-alkali areas; Resist weakly acidic fog corrosion in electroplating workshops to maintain accuracy and equipment lifespan.
Emerging fields: In the cutting of photovoltaic silicon wafers, the tension fluctuation of the diamond wire is ±0.3 μm, reducing the breakage rate; Control the thickness of cable insulation layers to ensure structural uniformity; Micro-scale tension control of thin-film solar cells.