Bently Nevada 3500/22M 288055-01+146031-01 Standard Transient Data Interface

The Bently Nevada 3500/22M TDI provides a direct interface between the 3500 monitoring system and GE’s System 1* machinery management software. It combines the functions of the 3500/20 Rack Interface Module and advanced communication processors.

Key Features

• Integrates with M series monitors like 3500/40M and 3500/42M

• Captures steady-state and transient data

• Transmits data over Ethernet using BN Host and BN TDI Protocol

• Optional Channel Enabling Disk enables dynamic data capture

• Functions in Slot 1 of every 3500 rack

• Required for both standard and TMR applications

Communication Capabilities

• Serial Communication: RS232, up to 115.2 kbaud

• Ethernet: 10Base-T/100Base-TX with RJ-45 connector

• Fiber Optic: 100Base-FX with MT-RJ connector (2,000m max)

• Supports communication with System 1 software and GE 3500 tools

Monitoring and Diagnostics

• Front panel LEDs indicate status, configuration validity, and communication

• Relay outputs signal rack status and fault conditions

• Trip Multiply function enables alarm suppression during startup

Front Panel Controls

• Rack Reset: Clears alarms and timed defeats

• Address Switch: Supports up to 127 unique rack addresses

• Configuration Keylock: Secures rack in RUN or PROGRAM mode

Technical Specifications

Power Consumption

• 10.5 Watts

Inputs and Outputs

• RS232 Serial and Ethernet (10Base-T / 100Base-TX / 100Base-FX)

• OK, TX/RX, TM, CONFIG OK LEDs

• Relay outputs for rack fault indication

• USB-B communication port (3m cable included)

Communication Protocols

• BN Host Protocol

• BN TDI Protocol

• Ethernet via TCP/IP, RS232, and Fiber Optic

Environmental Limits

• Operating Temperature: -30 °C to +65 °C

• Storage Temperature: -40 °C to +85 °C

• Humidity: 95% non-condensing

Battery Life

• Powered: 38 years at 50°C

• Unpowered: 12 years at 50°C

Physical Specifications

• Dimensions: 241.3 mm × 24.4 mm × 241.8 mm

• Weight: 0.91 kg (2.0 lbs)

Spare Parts

• 288055-01: Standard Transient Data Interface Module with USB cable

• 146031-01: 10Base-T/100Base-TX I/O Module

•