GE HYDRAN 201Ti Mark IV ONE Channel Controller Gas analyzer | HYDRAN201Ti - Welcome To The Official Website Of ❤Shenzhen Changxin Automation Equipment Co., Ltd❤ %

product description
Key features of the GE Hydran H201Ti include:
A 100% responsive composite gas sensor that is sensitive to hydrogen (general fault gas) and carbon dioxide (overheated paper).
An LCD display and standard RS-485 connection. It supports Modbus or Hydran protocols .
A vacuum gas extraction membrane and a system self-check and self-diagnosis feature
Local and remote alerts set at predetermined levels or rates. Remote viewing of gas readings and trends can be done via serial port communication
Easy installation on a single valve. There are no moving parts, no pumps, and no additional pipes are needed. It does not require on-site calibration.
The Hydran™ 201Ti is a small and easy to setup continuous Dissolved Gas-in-oil Analysis (DGA) monitor. It provides the basic information used by IEEE® Standard C57.104 and can be used as an essential first line of defence for the transformers in your fleet to obtain advance warning of a failure condition and minimize the risk of an unplanned outage. The 201Ti uses fuel cell technology (described as fixed instruments – method 3 in the standard) and is now available with a choice of either the world renown “Hydran Composite Gas” sensor which responds 100% to Hydrogen and is also sensitive to Carbon Monoxide, Acetylene and Ethylene or the more basic “Hydrogen Only” sensor which focuses purely on Hydrogen gas generation. Because the monitoring unit mounts on a single valve and uses Dynamic Oil Sampling, there is no need for a pump or extra piping to connect to different valves. Due to its uncomplicated features and the easily understood information it provides, the 201Ti has been amongst the monitors of choice for many years, with one of the largest installed base of any DGA monitor.
GE HYDRAN 201Ti | Mark IV | ONE Channel Controller Gas analyzer.It is Essential DGA monitoring for transformers，knowledge of their health condition is essential to having a reliable network. When a transformer’s insulation system is overstressed, gases are produced that dissolve in the oil. Dissolved Gas-in-oil Analysis (DGA) is recognized as the best indicator of developing faults.（Click for related products:HYDRANM2-X Hydran M2-X、Hydran M2 Mark III ）