GE IS200JPDSG1AEC MRP103592 Mark VI Board

IS200JPDSG1AEC belongs to the series: Mark VI IS200 series, which is mainly used in the management and control systems of GE-compatible gas, steam and wind turbine automation drives.
Technical specifications:
Transformation coefficient: It has four varistors for overvoltage protection to ensure the protection of circuit components when the voltage is abnormal.
Mounting type: Ordinary assembly, mounted on a sheet metal bracket through factory drilling, non-standard Mark VI series DIN rail or VME rack mounting method.
Weight: Approximately 3 pounds.
Diagnostic function: It can obtain diagnostic signals and route them to the connected PPDA components, including three analog P28 voltage readings, electronic identification information, and auxiliary power status feedback, etc. It can measure the power supply voltage through external test equipment.

There are also test loops on the module. Each test loop has a series of 10,000 ohm resistors to isolate the ground loop and return path for easy testing.

Comparison with other modules: Similar to the JPDM module, but the IS200JPDSG1AEC has more components, including more branch circuit fuses and output connectors, and may also carry PPDA I/O components due to the two ribbon cable connectors.

IS200JPDSG1AEC is suitable for industrial fields such as electric power, petrochemical, metallurgy, etc. that use gas turbines, steam turbines or wind turbines. It provides stable and reliable DC power distribution and signal transmission for the control systems of related equipment to ensure the normal operation of the system.