REXROTH FCS01.1E-W0011-A-04-NNBV R911311065 AC Inverter Drive Speed Controller

REXROTH FCS01.1E-W0011-A-04-NNBV R911311065 Bosch Rexroth IndraDrive Fc 2.2kW 400V 3ph – AC Inverter Drive Speed Controller

R911311065 refers to a Bosch Rexroth IndraDrive Fc AC frequency inverter. It is designed for a 2.2kW (3.0HP) 400V 3 Phase motor with VxF or Sensorless Vector control to 5.5A. The device has a range of features, including two analog/digital inputs, five digital inputs, one analog output, two relay contact sets, RS232, and RS485. It has a compact design and is simple to install [plc-module.cn, 2, 4]

conds, 200% x 3.5 seconds
Speed Control Range – 0-400Hz.
Braking – To 130 Ohm minimum external resistor (not supplied) – See the Resistor options linked below or use the ‘Which Resistor’ button on this page.

Features – 2 x Analogue/Digital Inputs, 5 x Digital Inputs, 1 x Analogue Output, 2 x Relay Contact sets, RS232, RS485.
DC Bus terminals for Common Bus energy saving applications.
Programmable from a PC via ‘IndraWorks’ software and PC Cable – see linked products below.

Input Current – 7.7.
Input Voltage – 380-480V Three Phase -20% +10% at 50/60Hz ±5%.
EMC Filters to IEC/EN 55011 Class A 2nd Environment (Industrial)

Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below – 100mm.
Ventilation space at sides – 0mm (drives can be mounted side by side)
Heat Loss at max output – [not specified].
Mounting via 2 x detachable heatsink-mounted brackets at rear (top and bottom). 1 x 5.5mm diameter hole per bracket.

Full part number is FCS01.1E-W0011-A-04-NNBV or R911311065.