Bently Nevada 330103-00-12-10-02-00 8mm Electrical Eddy Current Displacement Probe (Copy)

Core Technical Parameters
Measurement Principle: Non-contact Eddy Current
Induction Head Diameter: 8mm
Effective Linear Range: 0.25 – 2.30mm, usable range 2mm (80mil)
Standard Sensitivity: 7.87 mV/μm (200 mV/mil)
Standard Installation Gap: 1.27mm (50mil), static output approximately – 9VDC
Frequency Response: 0 – 6.5kHz (-3dB)
Calibration Target Material: AISI 4140 steel shaft
Minimum Compatible Shaft Diameter: 50.8mm (2 inches), recommended ≥ 76.2mm (3 inches)
Operating Temperature: -35℃ ~ +177℃; Storage – 40℃ ~ +200℃
Shell: 303/304 stainless steel; Head Insulation: PEEK/PPS high-temperature resistant material
Sealing: Viton fluororubber O-ring
Standard Specification: API 670 Rotating Machinery Monitoring Specification

Complete Set of TSI Sensor Accessories
Probe Body: 330103-00-12-10-02-00
Extension Cable: 330130 series (optional length selection)
Preamplifier: 330180 / 330181 3300XL preamplifier
The entire set of components does not require pairing calibration and can be interchangeable and universal

Monitoring Applications
Radial shaft vibration amplitude monitoring
Axial thrust displacement (shaft runout) measurement
Keyphasor key phase, zero speed, phase signal pickup
Applicable equipment: steam turbines, gas turbines, centrifugal compressors, large fans, gearboxes, generators, chemical / power plant high-pressure pumps and other key rotating equipment TSI protection system