Bently Nevada 330103-10-18-10-02-00 8mm Eddy Current Displacement Probe
I. Complete Interpretation of Model Segments
330103: 3300 XL 8mm standard probe, M10×1 metric thread, non-armored cable
10: Length of the non-threaded front end of the probe 0mm, thread reaching the end face
18: Total length of the probe’s metal housing 80mm
10: Length of the integrated cable of the probe 1.0m
02: ClickLoc micro coaxial quick connector, double-layer shielding standard cable
00: General industrial standard type, without explosion-proof, ship class, etc. special certifications
Core Technical Parameters
Measurement Principle: Non-contact Eddy Current
Induction Head Diameter: 8mm
Effective Linear Range: 0.25 – 2.30mm, usable range 2mm (80mil)
Standard Sensitivity: 7.87 mV/μm (200 mV/mil)
Standard Installation Gap: 1.27mm (50mil), static output approximately – 9VDC
Frequency Response: 0 – 6.5kHz (-3dB)
Calibration Target Material: AISI 4140 steel shaft
Minimum Compatible Shaft Diameter: 50.8mm (2 inches), recommended ≥ 76.2mm (3 inches)
Operating Temperature: -35℃ ~ +177℃; Storage – 40℃ ~ +200℃
Shell: 303/304 stainless steel; Head Insulation: PEEK/PPS high-temperature resistant material
Sealing: Viton fluororubber O-ring
Standard Specification: API 670 Rotating Machinery Monitoring Specification
Complete Set of TSI Sensor Accessories
Probe Body: 330103-10-18-10-02-00
Extension Cable: 330130 series (optional length selection)
Preamplifier: 330180 / 330181 3300XL preamplifier
The entire set of components does not require pairing calibration and can be interchangeable and universal
Monitoring Applications
Radial shaft vibration amplitude monitoring
Axial thrust displacement (shaft runout) measurement
Keyphasor key phase, zero speed, phase signal pickup
Applicable equipment: steam turbines, gas turbines, centrifugal compressors, large fans, gearboxes, generators, chemical / power plant high-pressure pumps and other key rotating equipment TSI protection system
There are no reviews yet.