ELAU ISH100/30044/0/0/00/0/00/01/00 Servo motor / Controller

ELAU ISH100/30044/0/0/00/0/00/01/00 Three-in-One Integrated Servo Motor (with Built-in Drive Controller)

iSH Integrated Servo Appearance
I. Brand and Product Positioning
Brand: ELAU (Schneider Schneider PacDrive M iSH Integrated Platform)
Structure: Permanent magnet synchronous motor + power drive amplifier + SERCOS servo controller integrated as one unit, without the need for an external MC-4 servo driver
Original factory status: Fully discontinued, packaging, printing, and core replacement spare parts for medical automation equipment
Upper-level matching: Fiber SERCOS II bus directly connected to the ELAU C200 / C400 motion controller host

Complete 9-stage model code disassembly by each digit ISH100 / 30044 / 0 / 0 / 00 / 0 / 00 / 01 / 00
ISH100: iSH Series, 100mm square IEC B5 installation flange with high-power body frame
30044: Performance Specifications – Rated Speed 3000 RPM, Continuous Rated Torque 4.4 N·m
1st Position 0: Natural convection air cooling, no cooling fan
2nd Position 0: Standard solid flat key output shaft (DIN6885 standard)
00: F-class standard insulation winding, universal anti-corrosion body coating, no special customized protection
6th Position 0: B0 without electromagnetic brake locking shaft (digital 1 = with brake B1 version)
00: No additional I/O, sensor expansion module
01: Encoder core distinction (compared to model 11 encoder)
01 = SKS36 single-turn SinCos absolute value encoder (single-turn 360° high-precision positioning)
11 = SKM36 multi-turn SinCos absolute value encoder (multi-turn infinite rotation positioning)
Both models are equipped with motor electronic nameplates. The power-on PacDrive system automatically identifies the motor parameters, eliminating the need for manual setting.
00: Standard SERCOS II optical bus communication, no additional third-party fieldbus expansion
3. Core Electrical Performance Parameters
Power, Torque, Speed

Rated Power: 2.0 kW (suitable for three-phase 400V grid rectified DC bus supply)
Continuous Rated Torque: 4.4 N·m
Peak Overload Torque: 17.6 N·m (4 times short-time impact overload, suitable for high-speed start-stop loads)
Rated Speed: 3000 RPM; Maximum Safe Speed: 6000 RPM
Rotor Inertia: Low inertia design, excellent dynamic acceleration and deceleration response speed
Current and Power Supply
DC Main Bus: DC530~680V (400V industrial grid standard bus voltage)
Motor Rated Current: 3.6 A rms; Peak Output Current 14.4 A rms
Control Auxiliary Power Supply: DC24V, 0.95A
Winding Insulation: F-class (with a temperature resistance of 155℃), built-in PTC thermistor for real-time monitoring of motor overheating
Built-in Drive Control Capability
Body integrates complete three-loop servo regulation (current loop → speed loop → position loop), supporting three

operation modes:
Multi-axis synchronous positioning (electronic cam, electronic spindle, fly-cutting)
Speed Speed Control Mode
Torque Limiter Tension Control Mode
SERCOS II optical high-speed bus, multi-axis synchronous jitter extremely low, perfectly compatible with PacDrive complete motion control system
4. Interface and Protection Configuration
01 Single-turn SKS36 SinCos absolute value encoder
24-bit high-resolution, single-turn precise positioning; comes with motor identity parameters, automatically matched and debugged by PacDesigner software, resistant to oil, dust interference, suitable for workshop conditions
Integrated composite aviation plug
Single group connector integrates power supply, encoder signal, SERCOS optical communication in one line, significantly simplifying control cabinet wiring
Overall Protection Grade: IP65 (standard sealing of the body and shaft end, can be directly used in food, medicine humid and dusty production lines)
5. Mechanical Dimensions and Environmental Specifications
Installation Flange: 100mm×100mm square standard B5 flange, solid flat key output shaft
Overall Length: Approximately 265mm; Net Weight of the Entire Machine: Approximately 7.8kg
Cooling Method: Natural air cooling without fan, quiet and maintenance-free operation
Operating Temperature: -10℃ ~ +50℃; Storage and Transportation Temperature: -25℃ ~ +70℃
Humidity: 5%–95% without condensation; Resistant to 10G mechanical vibration and impact Safety certification: CE, UL, cUL, IEC 61800 standard certification for speed control equipment