ELAU SM070-60-010-P0-45-S1-B0 Compact High-Precision Servo Motor

I. Brand and Series
Brand: ELAU (Schneider Schneider PacDrive motion control system)
Series: SM Compact Permanent Magnet Synchronous Servo Motor, focusing on high power density， low inertia， and high-speed dynamic scenarios
Compatible Drives： Perfectly compatible with MC-4/11/01/400， MC-4/11/03/400 400V servo drives
Original Factory Status: Has been discontinued, packaging as a core replacement part for automation equipment

Complete Model Segmentation Explanation SM070 – 60 – 010 – P0 – 45 – S1 – B0
SM: Servo Motor Standard Synchronous Servo Motor Series
070: Square Flange Installation Dimension 70mm
60: Stator Core Length Specification
010: Rated Power 1.0kW
P0: Standard Basic Mechanical Shell Structure (Lightweight Compact Body)
45: 400V High Voltage Winding Voltage Level
S1: 24bit Single-Loop SinCos Absolute Value Encoder (Built-in Electronic Nameplate)
B0: Electromagnetic Brake Release Version (B1 is with Brake Lock Shaft)

Core Electrical Performance Parameters
Power Torque Speed
Rated Power: 1.0 kW
Rated Continuous Torque: 2.4 N·m
Peak Overload Torque: 7.2 N·m (3 Times Short-Term Overload, High-speed Rapid Start and Stop)
Rated Speed: 3000 RPM; Maximum Safe Speed: 6000 RPM
Electrical Current Winding
Rated Phase Current: 6.0 A rms
Winding Voltage: Three-phase 400V AC, compatible with MC-4 400V Bus Drive
Low Tooth槽 Torque Design， Smooth Operation at Low Speed without Jitter
Insulation Class： F Grade (Temperature Resistance 155℃)
Dynamic Characteristics
Very Low Rotational Inertia of the Rotor， Fast Acceleration and Deceleration Response， Suitable for High-Frequency Repeated Positioning Processes

Encoder and Interface Configuration
Feedback Unit： S1 Single-Loop SinCos High-Resolution Absolute Value Encoder (24bit)
Power-On Automatic Recognition of Motor Electronic Nameplate， Driver No Need for Manual Parameter Setting， One-Click Debugging
Power Connector： Large Power Standard Aviation Plug， Direct Connection to MC-4 Drive Power Cable
Protection Sealing： Overall Body IP65， Shaft End and Flange Waterproof and Dustproof， Can Be Directly Used in Workshop with High Dust and Mild Splash Water Environment

Mechanical Structure Dimensions
Installation Flange： 70mm×70mm Standard Square Flange
Output Shaft： Diameter 14mm， With Standard Flat Key Slot
Overall Machine Dimensions： Length 114mm × Width 70mm × Height 70mm
Overall Machine Net Weight： Approximately 1.5kg， Smaller Volume and Lightweight Compact Design at the Same Power
Cooling Method： Natural Air Cooling without Fan， Maintenance-Free Silent Operation