I. Basic Identity Information
Full Model Name: IS215WEPAH2BA
Brand Manufacturer: GE Vernova (formerly GE Energy / GE Fanuc)
System Platform: Speedtronic Mark VIe / Mark VIeS Turbine / Generator Control System, equipped with EX2100 Generator Excitation System
Board Card Abbreviation Explanation
WEPA = Wind Energy Pitch Axis (The name is derived from the pitch control board of the wind turbine, and is actually mainly used for power plant excitation / turbine I/O centralized)
H2 = Second-generation High-performance Hardware Version
BA = Version A, basic industrial configuration
Physical Specifications: Standard 6U VME bus card, VME rack installation
Core Function Positioning
1. Two Main Core Uses
1) Local I/O Central Processing Board for EX2100 Excitation System
As the local signal conditioning center of the excitation cabinet, it collects generator rotor / stator voltage, current, temperature, and switch quantities, outputs excitation regulation, disconnection, protection trip signals; completes analog signal filtering, thermocouple / RTD conditioning, contact signal anti-jitter.
2) Mark VIe Distributed Terminal Control Module (TCM)
Through the high-speed WEPA backplane bus (IONet/UDH) connects the scattered I/O sub-cards within the rack, transfers local real-time data to the main controller UR card; locally executes rapid closed-loop logic, shortening the excitation / speed control response cycle.
2. Communication Architecture
Onboard WEPA High-speed Industrial Ethernet Backplane Bus (IONet/UDH), connects the I/O sub-cards of the same rack
Front panel has network ports, serial ports, VME bus interfaces, and interfaces with the main CPU of Mark VIe
Supports multi-frame period control: 10ms/20ms/40ms real-time calculation, suitable for high-precision excitation adjustment requirements
Hardware Signal Resources
Multiple Analog Input AI: AC sampling of generator PT/CT, 4–20mA, RTD platinum resistance, thermocouple temperature measurement channels, built-in isolated signal conditioning
Multiple Digital Input/Output DI/DO: 24VDC switch quantity, excitation switch, disconnection switch, protection trip, fault alarm relay drive
Multiple Row Terminal Terminal Blocks: Directly connected to the terminal board of the excitation power cabinet, no need for intermediate transfer and connection cards
Onboard Power Conversion Circuit: 5VDC conversion from the rack to multiple isolated ±15V/24V, providing power for the signal acquisition circuit
Key Electrical and Environmental Parameters
Backplane Power Supply: VME 5VDC, the overall power consumption is approximately 10W
Insulation Voltage Resistance: Signal circuit to ground ≥ 1000MΩ insulation resistance, full protection against surges, ESD
Operating Temperature: -20℃ ~ +60℃; Storage -40℃ ~ +85℃
Humidity: 5%–95% RH, no condensation, used in the control cabinet (IP20)
Anti-Vibration: Complies with the high-vibration industrial standard for power plant turbine cabinets
Typical Application Scenarios
Thermal Power / Gas Turbine Power Plant EX2100 Generator Excitation Control Cabinet (The most mainstream scenario)
Local I/O Rack for Mark VIe Speed Control / Protection System of Large Gas Turbines, Steam Turbines
Variable Pitch Control System for Large Wind Turbine Generators (The original naming scenario, used in power plants less)
Excitation Regulation Unit for Hydroelectric Turbine Generators
Spare Parts and Version Differentiation
Comparison of derivative models of the same series
IS215WEPAH2BA: Standard version, EX2100 excitation standard configuration
IS215WEPAH2BB: Enhanced version, adds extended communication and redundant monitoring channels IS215WEPAH1xx: The first generation WEPA board, the hardware is incompatible with the H2 series
Supply status
The original factory has not completely stopped production, but the delivery time is long; the spare parts for power plant existing units rely on brand new inventory / refurbished pieces
Supporting configuration software: ToolboxST (specifically for Mark VIe/EX2100 programming and debugging)
Supporting matching boards and cards
Often used in combination with IS210BPPCH1ACA (backplane power board) and UR series CPU controllers
There are no reviews yet.