ABB DSAI130K13 3BSE019911R1 Analog Input Module

ABB DSAI130K13 (Material Number: 3BSE019911R1) Analog Input Module
I. Basic Material Information
Model: DSAI130K13
Original ABB Order Number: 3BSE019911R1
System: ABB Advant OCS / MasterPiece DCS System (Old Model MP200/MP300 Controller Platform)
Product Type: 16-channel Isolated Analog Input Module
Installation Method: Standard Rack Slot Installation, Backplane Bus Communication, IP20 Protection Inside the Cabinet
Original Factory Status:停产， Market Circulation： New Inventory， Disassembled Inspection Spare Parts

Core Technical Parameters
Channel Specifications
16-channel single-ended analog input， grouped electrical isolation， each 8 channels as one group of isolation， resistant to industrial electromagnetic interference.
Supported Signal Types
4-20mA Current-Type Transmitter Signal (Most Common， Pressure， Level， Temperature， Flow Instruments)
0-20mA Direct Current Signal
0-5V， 0-10V Voltage Signal
Accuracy and Sampling
Resolution： 12-bit A/D Conversion
Overall Accuracy： ±0.1% FS
Channel Scanning Cycle： Millisecond-level Batch Loop Acquisition
Power Supply Method
Powered by the DCS Rack Backplane， no need for external separate power supply； can be combined with dedicated FTA Terminal Board to realize on-site instrument wiring. Environmental parameters
Working temperature: 0℃ to +55℃; Storage temperature: -40℃ to +85℃

Core Functions
Collect various process analog signals on-site, convert them into digital quantities and upload them to the MP series controllers for regulation, display, interlock, and PID control.
Support channel fault diagnosis: short circuit, open circuit, and over-range fault detection, which can trigger alarm prompts on the upper-level DCS interface.
Support cold-end compensation, and can be connected to thermocouple and thermal resistance type temperature transmitters.
Have hardware overvoltage and overcurrent protection to prevent on-site instrument failures from damaging the main control module.

Companion FTA Terminal Board
Commonly used terminal board model: 3BSE019912R1, serving as the on-site wiring terminal base for DSAI130K13, achieving centralized wiring of instrument cables and channel fuse protection.

Typical Application Scenarios
Old ABB MasterPiece DCS control systems in thermal power, metallurgy, papermaking, and chemical industries
Process parameter collection for boilers and turbine units, pressure, temperature, flow, and level monitoring
Technical renovation, spare part replacement, and system maintenance of old facilities in large factories