Detailed Explanation of ABB ICMK14F1-L12.0 Module (Order Number 1SBP260050R1001)
Basic Positioning & Model Interpretation
1. Product Line: ABB AC31 series PLC distributed remote I/O expansion unit (not a pure digital input module, it is a 8 digital inputs + 6 relay outputs** mixed-type module), produced in Sweden; `ICMK14F1-L12.0` is the complete hardware model, `1SBP260050R1001` is the unique purchase material code of the manufacturer.
2. Compatible Host: Combined with AC31-50 series PLC controllers (such as 07KR51), it expands measurement points through CS31 fieldbus networking, suitable for low-voltage switch cabinets and distributed automation scenarios in factory production lines.
Core Hardware Parameters Table
| Parameter Category | Detailed Specifications | | — | — |
| Channel Configuration | 8 channels of 24VDC digital input, 6 channels of relay contact output |
| Power Supply Requirements | Rated 24VDC, allowable fluctuation range 19.2~30VDC |
| Input Characteristics | Typical input current per channel 5mA, follows EN 61131-2 Type1 standard, equipped with channel status LED indicator |
| Output Capacity | Rated current of relay per channel 2A (AC120V/230V universal) |
| Communication Interface | RS485 half-duplex interface, native support CS31 bus, compatible with Modbus RTU protocol |
| Dimensions | 120mm×93mm×84mm (width/height/depth), net weight approximately 0.3kg |
| Installation Protection | Standard DIN rail snap-in installation, protection class IP20; operating temperature range -20℃~+70℃ |
| Structural Advantages | Supports hot-swapping, can be offline replaced without interrupting the operation of the entire system |
Main Functions
1. Switch Quantity Collection + Local Control Integration**: Collect digital signals from on-site buttons, limit switches, sensors, and directly drive contactors, small valves through relay output;
2. Remote Measurement Point Expansion**: Relying on CS31 bus, the farthest networking distance is 500 meters. A single master controller can be connected to a maximum of 6 sets of local expansion units, significantly expanding the PLC measurement point capacity;
3. **Multi-system Integration**: Can be connected to third-party DCS, SCADA platforms, suitable for self-control renovation of power switch cabinets, metallurgical production lines, water treatment substation;
4. Hardware Self-Detection**: Active alarms for channel faults, communication disconnection, facilitating rapid on-site troubleshooting.
Typical Application Scenarios
Low-voltage intelligent distribution cabinet signal collection, distributed IO stations in workshops, auxiliary machine start-stop control of small units, on-site measurement points expansion of water treatment pump stations. It can be combined with the previously queried GE RX3i PLC, Rosemount temperature transmitters to build a complete measurement and control link.
There are no reviews yet.